Introduction
Ndrive HP 10/20/30 User’s Manual
1-2
www.aerotech.com
1.1. Feature
Summary
•
Software configurable for brush, brushless and stepper motor operation
•
Standard 100 VDC – 320 VDC Bus, optional 20 VDC – 80 VDC Bus, requires
the -AUXPWR option
•
Fully isolated power stage
•
5 VDC, 500 mA fused user output power for encoder and Hall effect signals,
etc.
•
Two mounting orientations optimized for heat transfer or minimal panel space
utilization
•
Full protection against the following failure modes:
1.
Control supply under voltage
2.
Continuous current overload
3.
Power stage bias supply under-voltage
4.
Power stage output short circuit (phase to phase and phase to ground)
5.
DC bus over voltage
6.
IGBT device over temperature sense
•
Line driver square wave or analog sine wave quadrature encoder primary
position and velocity feedback
•
Line driver square wave auxiliary quadrature encoder input or output for PSO
(laser firing), etc.
•
4 opto-isolated user outputs standard
•
6 opto-isolated user inputs standard, 2 of which are high speed
•
2 differential analog inputs (one standard and one available with the –IOPSO
option)
•
2 analog outputs (one standard and one available with the –IOPSO option)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
