Aerotech Automation1 XC2, Hardware Manual, Page: 64 / 96

3.1. Position Synchronized Output Interface [-EB1]
The PSO output signal is available on the -EB1 option board in two signal formats: TTL and Isolated.
You cannot use a sine wave encoder with the -MX1 multiplier option as an input to the PSO. The -MX1
option does not generate emulated quadrature signals.
Table 3-1: PSO Specifications [-EB1]
Specification Value
Output
TTL 5 V, 50 mA (max)
Isolated 5-24 V, 250 mA
Maximum PSO Output (Fire) Frequency
TTL 12.5 MHz
Isolated 5 MHz
Output Latency
[Fire event to output change] TTL 5 ns
Isolated 150 ns
Table 3-2: PSO Interface Connector Pinout [-EB1]
Pin # Description In/Out/Bi Connector
1 PSO Output
2 PSO Output- Output
3 PSO Output (TTL) Output
4 Ground N/A
Table 3-3: Mating Connector Part Numbers for the PSO Interface Connector [-EB1]
Type Aerotech P/N Third Party P/N
Wire Size: mm
2
[AWG]
4-Pin Terminal Block ECK02399 Phoenix 1768004 0.5- 0.14 [20-26]
3.1. Position Synchronized Output Interface [-EB1] XC2 Hardware Manual
64 www.aerotech.com