2.2. Motor Power Output Connector
The drive can be used to control brushless motors (refer to
).
For a complete list of electrical specifications, refer to
DANGER: Shock and Fire Hazard
Electrical wiring must be designed and installed in accordance with local electrical
safety regulations to prevent the risk of fire and electrical shock.
The 4-pin terminal block style motor output connector is located on the front panel. The pinout for
this connector is shown in
.
Table 2-6:
Motor Power Output Connector Pinout
Pin
Function
A
Motor Phase A Output
B
Motor Phase B Output
C
Motor Phase C Output
Motor Ground
Table 2-7:
Motor Output Mating Connector Ratings
Type
4-Pin Terminal Block
Aerotech Part Number
ECK02495
Manufacturer Part Number
(1)
Phoenix 1710352
Insulation Strip Length
12 mm (0.5 in)
Tightening Torque
1.7..1.8 N·m
One conductor stranded with ferrule and
plastic sleeve
8..14 AWG (2.5..10 mm
2
)
Two conductors with the same cross-
section, stranded, twin ferrule with plastic
sleeve
10..14 AWG (2.5..6 mm
2
)
(1) Refer to the manufacturer website for additional information.
2.2. Motor Power Output Connector
iXC6e/XC6e Hardware Manual
32
www.aerotech.com
