![background image](http://html.mh-extra.com/html/aeroqual/aqm60/aqm60_user-manual_2862855013.webp)
Page | 13
Aeroqual AQM60 User Guide
A programming port is also exposed through the side of the module to allow custom programs to be loaded
into the module.
Note 1: Aeroqual can supply a standard programming tool for distributors to reprogram the auxiliary
module to the specified requirements.
Note 2: Please refer to third party sensor manuals for instructions on wire outputs. The Wind Sonic
comes with an Aeroqual supplied cable and therefore wire outputs will be sent with the cable.
1.10. Particle Mass Pump Modules
The Pump Modules for the optical mass sensors contain a microprocessor for mass calculation and a pump
for sampling. There is a different pump module for the Nephelometer and optical particle counter (Profiler)
sensor modules
1.10.1.
Profiler Pump Module
1.10.2.
Nephelometer Particle Monitor
Purge line
Exhaust line with
flow adjuster
Inlet heater connector
RS232 connector from
optical engine.
12VDC power
connection
RS485 termination
dongle
RS485 bus cable
Sample line
Power on LED
Inlet heater connector
Cable from optical engine
12VDC power
connection
RS485 termination dongle
RS485 cable
Exhaust line with flow
adjuster
Power on LED
Sample in
Sheath air out with
flow adjuster
Fibre span switch
Summary of Contents for AQM60
Page 1: ...Aeroqual AQM60 User Guide ...