Page | 18
Aeroqual AQM60 User Guide
Power cable from
heated inlet
2.2.3. Assembly of heated inlet for PM/Profiler (Optional)
Parts List:
A. Inlet Tube/Heater including power cable
B. Sharp Cut Cyclone (if fitted)
C. TSP Inlet
i.
Connect parts A, B and C
ii.
Open door of enclosure and remove protective cap from the optical engine
iii.
Insert Inlet Tube Assembly through base mount and fix the three mounting screws
Note 1: The top plate solar shield may need to be removed to screw in the mounting screws
Note 2: Ensure the power cable is fed through the inlet hole when connecting
iv.
Connect power to Inlet Tube/Heater
inside the enclosure
A
B
C
Mounting
Screws
Protective
Cap
Summary of Contents for AQM60
Page 1: ...Aeroqual AQM60 User Guide ...