![background image](http://html.mh-extra.com/html/aeroqual/aqm60/aqm60_user-manual_2862855022.webp)
Page | 22
Aeroqual AQM60 User Guide
3.
AQM60 Software Description
The AQM V6.x Software is designed to be a simple interface for communicating with the AQM monitor via a
PC. It can be used to configure the AQM, initiate the zero calibration routine, modify gain factors, poll data
and display the data in either table or graphical format. The software runs in Java VM1.6 (supplied with
software) and the database is an open source HSQLDB Java database. The software also incorporates a
GSM modem connection which can be used to connect to and operate an AQM unit remotely.
Note 1: The software is compatible with AQM firmware versions 5.0 and higher only.
Note 2: If an AirCal8000 is installed the software will differ slightly, refer to Section 3.9 for more
information.
3.1. Computer Requirements
CD-ROM Drive or internet connection for software download
RS232 serial port or USB
– RS232 serial port converter and USB cable (included)
Windows OS version 2000 or later
Minimum 120 Mb of spare hard drive space
Recommended 512 Mb RAM or more
Recommended 1 GHz processor speed or faster
3.2. Summary
3.2.1. File
Search monitor
Searches for available AQM monitors
Start Data Logging
Starts data logging from the AQM monitor
Stop Data Logging
Stops data logging from the AQM monitor
Export Logged Data
Exports logged data from the AQM monitor
Import Files
Imports file (aql file)
Download Files
Downloads files from the AQM; including daily files and event log
Update sensor list
Updates the sensor list on the database
Zip database
Zips the database
Unzip database
Unzips the database (prompted by a warning message).
Exit Ctrl X
Exits the AQM software
Summary of Contents for AQM60
Page 1: ...Aeroqual AQM60 User Guide ...