INSTALLATION
2-9
Auxiliary outputs
The following outputs can be used for controlling external devices:
AUX 0
contact 1
AUX 1
contact 2
AUX 2
contact 3
AUX 3
contact 4
AUX 4
contact 5
AUX 5
contact 6
AUX 6
contact 7
AUX 7
contact 8
AUX ENABLE
contact 9
Each output is CMOS compatible. The aux enable input needs to be set to a logical high to enable
the outputs.
Rack mounting
The instrument, which is normally supplied for bench mounting, may be mounted in a standard 19
inch rack (see Chap. 1 'Optional Accessories'). There are two slide rack mounting kits to
accommodate different depths of cabinet. These kits include full fitting instructions. A rack
mounting kit without slides is also available which contains front panel mounting brackets only.