Aeroflex 2050T SERIES, Operating Manual, Page: 315 / 322

OPTION 008 RF PROFILES AND COMPLEX SWEEP
Annex-B-19
Allowed Suffices: GHZ, MHZ, KHZ, HZ
Default Suffix:
HZ
:OFFS Set Relative Offset
Data type: Decimal Numeric Program Data
Allowed Suffices: dB
Default Suffix:
dB
:SAVE Save profile point
Data type: None
Allowed Suffices:
None
Default Suffix:
None
:REMOVE Remove a profile point (1 - Number of Points in profile)
Data type: Decimal Numeric Program Data
Allowed Suffices:
None
Default Suffix:
None
:POINT Select a profile point (1 - Number of Points in profile)
Data type:
Decimal Numeric Program Data
Allowed Suffices:
None
Default Suffix: None
:ERASE Clear profile in memory (0-9)
:STO Store profile in memory (0-9)
:RCL Recall profile from memory (0-9)
Data type:
Decimal Numeric Program Data
Allowed Suffices:
None
Default Suffix: None
PROFILE:EDIT:POINT? Responds with Carrier Frequency and Relative Offset for the point
requested as follows:
:PROFILE:EDIT:CFRQ <nrf>;OFFS <nrf>
Data type: Decimal Numeric Program Data
Allowed Suffices:
None
Default Suffix:
None
Example:
:PROFILE:EDIT:CFRQ 10000000.0;OFFS -9.9
PROFILE:EDIT? Responds with the Number of Points in Profile Editor as follows:
<number of points>
Example:
20
RF offsets
The GPIB commands for RF LEVEL OFFSETS are as follows:
RFLV
:OFFS [not used alone]
:NUM
Select RF Offset (1-5)
Data type: Decimal Numeric
Program Data
Allowed Suffices:
Default Suffix:
RFLV:OFFS (continued)
:VALUE Set current RF Offset value
Data type: Decimal Numeric Program Data
Allowed Suffices: dB
Default Suffix:
dB
:ENABLE Enable Selected RF Offset
:DISABLE Disable Selected RF Offset
:SAVE Store RF Offsets and status in non-volatile memory