ACCEPTANCE TESTING
6-27
Non-harmonics
(1) Connect the test equipment as shown in Fig. 6-13.
(2) Set the UUT to
[RF Level]
0 dBm
[Carrier Freq.]
10 kHz.
(3) Set the spectrum analyzer to a span of 100 Hz, 10 Hz filter, and referring to Table 6-19,
measure the level of the non-harmonics at the frequencies indicated ensuring that the levels
measured are less than -70 dBc.
Table 6-19 Carrier non-harmonic frequencies
UUT carrier
frequency (Hz)
Spectrum analyzer frequency (Hz)
(2050T/1T/2T)
10,000.0
104,867,600.0
1,000,000.0
105,857,600.0
20,000,000.0
124,857,600.0
21,093,749.0
125,951,349.0
200,000,000.0
104,867,600.0
1,350,000,000.0
1,348,322,280.0 & 1,351,677,720.0
(2051T/2T)
2,700,000,000.0
2,500,000,000.0
(2052T)
5,400,000,000.0
5,200,000,000.0