5
21.05 - 6068956_00
NXP 0500 - 1650 2-PIPE SYSTEM / 4-PIPE SYSTEM
EN
1. GENERAL WARNINGS
The units are constructed according to the recognised technical standards and safety
regulations.
Any contractual or extracontractual liability of the Company is excluded for injury/
damage to persons, animals or objects owing to installation, regulation and
maintenance errors or improper use.
All uses not expressly indicated in this manual are prohibited.
PRESERVATION OF THE DOCUMENTATION
1.
The instructions along with all the related documentation must be given to the
user of the system, who assumes the responsibility to conserve the instructions
so that they are always at hand in case of need.
2.
Read this sheet carefully; the execution of all works must be performed by
qualified staff, according to Standards in force on this subject in different
countries.
(D.M. 329/2004).
3.
The appliance warranty does not cover the costs for ladders, scaffolding or other
elevation systems, which may become necessary for carrying out interventions
under warranty.
4.
Do not modify or tamper with the heat pump as dangerous situations can be
created and the manufacturer will not be liable for any damage caused. The
warranty shall be become null and void if the above-mentioned indications are
not respected.
WARNINGS REGARDING SAFETY AND
INSTALLATION STANDARDS
1.
Before beginning any operation,
READ THESE INSTRUCTIONS CAREFULLY AND
CARRY OUT THE SAFETY CHECKS TO AVOID ALL RISKS.
2.
All the staff involved must have thorough knowledge of the operations and any
dangers that may arise at the moment in which the installation operations are
carried out.
AERMEC will not assume any responsibility for damage due to failure to follow these
instructions.
PRODUCT IDENTIFICATION
The units can be identified through:
- PACKING LABEL
which shows the product identification data.
- TECHNICAL PLATE
ATTENTION
Tampering, removal, lack of the identification plate or anything else does not allow the
sure
identification of the product and will make any installation or maintenance operation
to be
performed difficult.
STANDARDS COMPLIED WITH WHEN DESIGNING AND
CONSTRUCTING THE UNIT:
SAFETY
3.
Machinery directive
2006/42/EC
4.
Low voltage directive
LVD 2006/95/EC
5.
Electromagnetic compatibility directive
EMC 2004/108/EC
6.
Directive regarding pressurised devices
PED 97/23/EC, EN 378,
7.
UNI12735, UNI14276
ELECTRIC PART
1.
IEC EN 60335-2-40,
2.
IEC EN 61000-6-1/2/3/4
ACOUSTIC PART
1.
ISO DIS 9614/2
(
intensimetric method
)
2.
PROTECTION RATING
IP20
REFRIGERANT GAS
R410A
This
unit contains fluoride gases with greenhouse effect covered by the Kyoto Protocol.
Maintenance and disposal must only be performed by
qualified staff, in compliance with standards in force
Technical Plate
