3.
Start the measurement by pressing the
START/STOP
button.
4.
To display the measurement parameters, press
DISPLAY
parameters
and its frequency)
This function is used to measure an earth (ground) resistance with 2 auxiliary
electrodes.
be discussed in this section.
1.
Set the switch to
.
2.
Place electrodes
H (Z)
and
S (Y)
to form a straight line with the earth electrode
under test.
The distance between electrode
S (Y)
and the earth electrode is 62% of
the distance between electrode
H (Z)
and the earth electrode; the distance
between the electrodes
H (Z)
and
E (X)
should be 8 to 10 times the depth of
the rod you are testing.
each cable from the reel, to keep the cables as far apart as possible on the ground,
www.
.com
1.800.561.8187
Summary of Contents for 6470-b
