AEMC 6470-b, User Manual

Page: 60 / 69

or an earth potential measurement.
This message is displayed when the measurement is triggered by a short press of
the
START/STOP button and the resistances of the auxiliary electrodes are too high.
The measurement must then be started by a long press on the START/STOP but
them to display the correct result.
or
out of range.
and
the smoothing function (SMOOTH) may correct this.
Press the
2nd button, then the SMOOTH
smoothing.
needs to be either connected or discon
nected. You must correct the connections
or the measurement will not proceed. The
current I
nal S may also indicate that resistance R
S
is too high.
www. .com
information@itm.com 1.800.561.8187