AEMC 6470-b, User Manual

Page: 39 / 69

each cable from the reel, to keep the cables as far apart as possible on the ground,
metallic conductors (cables, rails, fences, etc.).
6. Start the measurement by pressing the START/STOP button.
To display the measurement parameters, press DISPLAY
S
, R , d, U , I and its frequency, U and its frequency).
To measure the resistances of the auxiliary electrodes H (Z) , S (Y) , ES (Xv) ,
and E (X) , or if the resistance of the electrodes is too high (see § 10.1), start the
measurement by a long press of the START/STOP button.
R and R , then R and R will be displayed.
> 2s
www. .com
information@itm.com 1.800.561.8187