AEMC 6470-b, User Manual

Page: 59 / 69

2. Loosen the four permanent screws at the bottom of the unit, but do not
3.
the front panel does not fall out. Then carefully pull the front panel and
the unit all the way out of the housing.
4.
5.
connection leads, and loosen the two screws at the bottom of the case.
Then put the battery back into the case.
6.
place it next to the front panel with the electronic components.
7.
touching the circuitry or components.
8.
leads with the plug through the largest slot in the battery case.
9. Insert the battery plug (in the corner, near the terminal for the optical
circuitry or components.
10. Return the back of the unit (with the new battery in the case) to the front
panel with the components, taking care not to stretch the battery leads.
Carefully lower the back of the unit and make sure that it is aligned
mounting pins on the front panel). Also make sure you do not pinch the
battery leads or other wires or components.
11.
case. Then put the battery back into the case.
12. Put the lid back onto the battery case and screw it shut.
13.
14. Put the unit back into the housing and screw it into place.
15. Fully charge the new battery in the unit before using it.
16. Reset the time and date.
MANUAL
www. .com
information@itm.com 1.800.561.8187