34
Clamp-on Ground Resistance Tester Model 6417
6.3.1.1 Data Displayed in Standard Mode
The last measurement is displayed. The MR
symbol and the sequence number of the
record being recalled are also displayed.
Figure 6-11 illustrates an impedance plus a
current measurement (
Ω+A
setting).
Figure 6-11
The stored values are displayed as they were
when recorded: same display range, alarm
states, NOISE signal, battery condition, etc.
However, the audible alarms are not
reproduced; only the
AL
symbol and the alarm
threshold blink.
Figure 6-12 illustrates a current measurement
(
A
setting).
Figure 6-12
Press ► to display the measurement storage
date/time screen.
To exit from the
MR
mode, set the rotary
switch to the desired mode.
Figure 6-13
6.3.1.2 Data Displayed in Advanced Mode
First Screen:
-
The last measurement is displayed,
namely the impedance referenced to
the chosen frequency.
-
The MR symbol and the sequence
number of the record being recalled are
also displayed.
-
Figure 6-14 illustrates an impedance
and current measurement.
-
Press ► to display the next screen.
Figure 6-14
www.
GlobalTestSupply
.com
Find Quality Products Online at:
