AEMC 6417 User Manual Download Page 21

Page: 21 / 52

Clamp-on Ground Resistance Tester Model 6417

Menu # Indication

Function

AL. Ω

Setting the Impedance Alarm Threshold (Ω):

■ Enter the menu by ►.

AL.

blinks.

■ Press ▲ or ▼ to select the state of the alarm:

: Disabled.

: Enabled for a measurement exceeding the

threshold.

: Enabled for a measurement below the

threshold.

■ Validate by ►.

Setting the Alarm Value:

■ Press ▲ or ▼ to select the impedance alarm

threshold (Figure 2-1, item #11).

■ Validate and return to the previous menu by ►.

AL. V

Setting the Voltage Alarm Threshold (V):

■ Enter the menu by ►.

AL. V

blinks.

■ Press ▲ or ▼ to select the state of the alarm

(Figure 2-1, item #10):

: Disabled.

: Enabled for a measurement exceeding the

threshold.

■ Validate by ►.

Setting the Alarm Value.

■ Press ▲ or ▼ to select the alarm threshold value

(Figure 2-1, item #11).

■ Validate and return to the previous menu by ►.

AL. A

Setting the Current Alarm Threshold (I):

■ Enter the menu by ►.

AL. A

blinks.

■ Press ▲ or ▼ to select the state of the alarm

(Figure 2-1, item #10):

: Disabled.

: Enabled for a measurement exceeding the

threshold.

■ Validate by ►.

Setting the Alarm Value.

■ Press ▲ or ▼ to select the current alarm threshold

(Figure 2-1, item #11).

■ Validate and return to the previous menu by ►.

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Summary of Contents for 6417





















































Search results

Summary of Contents for 6417

Reviews:

Related manuals for 6417

Brands by name

Popular brands

AEMC 6417, User Manual

Search results

Summary of Contents for 6417

Reviews:

Related manuals for 6417

Brands by name

Popular brands