- 22 -
TSE-N 10.00 A. B.
599 50 84 90
EN
14. General
Panel equipment:
-
Separate On/Off switch S0
-
6 pushbuttons S1 - S6 for choice of programs and options
All pushbutton functions can be adjusted free, without limitations, by personalisation at PNC-
Level.
The pushbuttons S1 - S3 and the LEDs LD1 - LD3 are mandatory.
(Necessary for the control of the service functions)
-
3-step Program Phase Display (PPD) with LEDs LD9 - LD11
Actually planned indication of the LEDs Clean - Dry - End
Optional equipment for variant handling
-
3-step start time delay (STD), displayed with the LEDs LD6 - LD8
The delay steps can be defined free, depending on the variants on PNC-level in production.
Every start time delay must has to be between 1 and 15 hours
-
LED-display for salt
-
LED-display for rinse aid
Possible program options:
-
Superwash
-
Start time delay
-
Half load kleine Menge
-
Temperature increase and/or decrease
-
Tablets program
-
Additional rinse phase (Extra rinse)
Other points:
-
Regeneration depending on water consumption / Adjustment and display of water hardness
via user interface
-
Assembly line test program
-
Different after sales functions (Failure memory, Single actuator mode, LED-Test)
-
Device specification for max. Energylabel ABC
-
No active drying with fan possible!
-
Water safety system with different variants and safety levels
(Also depending from external components)
Type of pushbuttons:
The On/Off-pushbutton S0 is a separat power switch with toggle function
All other possible pushbuttons S1 - S6 are of push-release type and directly on the electronic
board
Acknowledges and Displays:
All pushbutton acknowledges and all other displays are realised by LEDs.
The On/Off-button is the only one connected to a glow lamp instead of a LED with separat function
directly indicate On/Off.
