Advantech PPC-57 Series, Manual

Page: 25 / 108

Chapter 2 System Setup 15
Note: The touchscreen driver or PS/2 mouse driver
cannot be simultaneously installed with a
serial/COM port mouse driver.
2.3 Removing the Front or Rear Panel
You only need to remove the front panel of your PPC-57 to
replace your LCD or backlight. To remove the front panel, first
verify that all power sources to the PPC-57 have been disconnect-
ed. Next, remove the two screws below the front panel. Then,
pinching an upper corner of the front panel closed with one of
your hands, pull the lower edge of the front panel firmly outward.