Advantech PPC-57 Series, Manual

Page: 87 / 108

Chapter 7 SVGA Setup 7 7
If your previously installed driver is not TurboDLD, you will have
to reconfigure the RENDER command the first time you use it.
Lotus 1-2-3 and Lotus Symphony
These drivers are designed to work with Lotus 1-2-3 versions 2.0,
2.01 and 2.2, and with Lotus Symphony versions 1.0 and 1.1.
Driver installation
Step 1: Place the display driver diskette into drive A. Make A the
default drive by typing A: <ENTER>. Run the SETUP program by
typing SETUP <ENTER>. Press any key to display a list of sup-
ported applications. Use the arrow keys to select Lotus/Symphony,
and press <ENTER>. A list of supported screen resolutions will be
displayed. Use the arrow keys to select the desired screen resolu-
tion and press <ENTER>. (Make sure your monitor is able to
display the resolution desired.) Press <END> to begin the driver
installation process. A default drive and directory path will be
displayed. Use the backspace key to erase this default and type in
the 123 directory. At this point you may be asked to create the
target directory if it does not already exist. After the files have been
installed, press any key to return to the list of supported applica-
tions. Press <ESC> followed by Y to exit to DOS. Copy all the files
that were just created in the temporary directory on to a formatted
floppy diskette.
Step 2: Go to your 123 directory, and start the installation program.
Type the following commands:
C: <ENTER>
INSTALL <ENTER>
Step 3: The Lotus installation program will load and present the
installation menu. From this menu, select Advanced Options. From
the Advanced Options menu, select Add New Drivers To Library.
From the Add New Drivers Menu, select Modify Current Driver
Set. From the Modify Driver Set Menu, select Text Display. From
the Text Display menu, select one of the drivers.