Advantech PPC-57 Series, Manual

Page: 95 / 108

Appendix A Programming the Watchdog Timer 85
After data entry, your program must refresh the watchdog timer by
rewriting I/O port 443 (hex) while simultaneously setting it. When
you want to disable the watchdog timer, your program should read
I/O port 443 (hex).
The following example shows how you might program the
watchdog timer in BASIC:
10 REM Watchdog timer example program
20 OUT &H443, data REM Start and restart the
watchdog
30 GOSUB 1000 REM Your application task #1,
40 OUT &H443, data REM Reset the timer
50 GOSUB 2000 REM Your application task #2,
60 OUT &H043, data REM Reset the timer
70 X=INP (&H043) REM Disable the watchdog timer
80 END
1000 REM Subroutine #1, your application task
• •
• •
• •
1070 RETURN
2000 REM Subroutine #2, your application task
• •
• •
• •
2090 RETURN