Advantech PPC-57 Series, Manual, Page: 85 / 108

Chapter 7 SVGA Setup 7 5
Panning drivers
Special panning drivers are provided to allow high-resolution
modes to be displayed on a flat panel or CRT. These drivers will
show a section of a larger screen and will automatically pan, or
scroll, the screen horizontally and vertically when the mouse
reaches the edge of the display.
Linear acceleration drivers
A special high-performance linear acceleration driver is provided
for 256-color modes. This driver may require special hardware and
may not be supported on all systems. It is only available for
Windows3.1.
AutoCAD R12
These drivers are designed to work with Autodesk AutoCAD R12.
They conform to the Autodesk Device Interface (ADI) for Render-
ing drivers and Display drivers. These display list drivers acceler-
ate redraw, pan, and zoom functions.
Driver installation
Step 1: Place the display driver diskette in drive A. Type A:
<ENTER> to make this the default drive. Type SETUP <ENTER> to
run the SETUP program. Press any key to get to the applications
list. Using the arrow keys, select AutoCAD Release 12 and press
<ENTER>. This will display a list of supported driver resolutions.
Using the arrow keys and the <ENTER> key, select the resolutions
that are appropriate for your monitor. When all of the desired
resolutions have been selected, press <END> to begin the installa-
tion. At this point you will be asked for a drive and directory to
copy the driver files. Enter the drive and directory that contains the
installed AutoCAD R12. If the destination directory does not exist
you will be asked for confirmation. When the installation is
complete, press any key to continue. Press <ESC> followed by Y to
exit to DOS.