Advantech PPC-57 Series, Manual, Page: 53 / 108

Chapter 4 The Engine of the PPC-57 (PCM-3866) 43
10Base-T Ethernet connector (CN5)
PCM-3866 10Base-T Ethernet connector
Pin Signal
1 TX+
2 TX-
3 RX+
4 N/C
5 N/C
6 RX-
7 N/C
8 N/C
The PCM-3866 is equipped with a high performance 16-bit
Ethernet interface which is fully compliant with IEEE 802.3 10
Mbps CSMA/CD standards. It is supported by all major network
operating systems and is 100% Novell NE2000 compatible.
Configuration of the Ethernet is very easy and can be done via the
RSET8019.EXE program included on the utility disk. This
program enables you to view the current Ethernet configuration, to
reconfigure the Ethernet interface (IRQ, I/O address, etc.), and to
execute useful diagnostic functions. (See Chapter 5 for detailed
information.)
The RSET8019.EXE program provides two ways to configure the
Ethernet interface. Configuration can be done automatically when
you choose the PnP (Plug and Play) option. Alternatively, when
you choose the jumperless option, the following IRQ and I/O
address settings are available (see over).