Advantech PPC-57 Series, Manual

Page: 88 / 108

7 8 PPC-57 User's Manual
Step 4: After the selection of the appropriate VGA display driver,
you will need to exit this menu and return to the Main Lotus
Installation Menu. Do this by selecting Return To Menu.
Step 5: At the Main Lotus Installation Menu, select Save Changes.
Step 6: At this point, the Installation Menu will prompt you for the
name of your new Lotus configuration file. The Lotus system will
prompt you with the default value — 123.SET, but you may want to
use a file name that indicates the resolution of its driver. For
example, if you installed the 132 column by 25 line driver, you could
name this driver 132X25.SET, or if you installed the 80 by 50 driver,
you may want to call the file 80X50.SET.
Step 7: The installation of your Lotus 1-2-3 driver is now complete.
You will need to exit the Lotus installation program at this point. At
the main Lotus Installation Menu, select Exit.
Note: If your driver set is not 123.SET, you must type
the file name of your driver set in the command
line when you start Lotus 1-2-3. For example, if
you named your driver set 132X25.SET, type the
following to start Lotus 1-2-3:
123 132X25.SET <ENTER>
VESA
The Video Electronics Standards Association (VESA) has created a
standard for a Super VGA BIOS extension (VBE). This defines a
standard software interface to allow application programs to set
and control extended video modes, such as 800 x 600 graphics, on
video adapters from different manufacturers.
The VESA driver adds this Super VGA BIOS extension to the VGA
BIOS. Any application program which supports the VESA standard
driver interface can be used with this driver. The VESA driver
conforms to the VESA Super VGA Standard #VS891001.