Advantech MIC-6314 Series, User Manual

Page: 93 / 136

81 MIC-6314 User Manual
Chapter 4
H
PM.1
Update
4.5.2 Activate BIOS Image
After the new BIOS image is successfully loaded (known as the “deferred” version),
the image must be activated to enable booting of the new BIOS. Perform the follow-
ing two actions to activate the BIOS image and complete the upgrade.
4.5.2.1 HPM.1 Activate Command
Schedule BIOS loading using the HPM.1 activate command: shown below.
4.5.2.2 Payload Cold Reset
A payload cold reset is required to activate the new BIOS image.
The payload reset can be performed using either of the following methods:

For users working on the local OS (KCS), a linux “reboot”, “power off”, or “halt”
operation is required.

For users accessing the BMC through an alternate interface (LAN/IPMB), a
deactivation and activation cycle is required to load the new BIOS image.
[root@localhost ~]# ipmitool hpm activate
PICMG HPM.1 Upgrade Agent 1.0.9:
(*) Component requires Payload Cold Reset