Advantech MIC-6314 Series, User Manual

Page: 90 / 136

MIC-6314 User Manual 78
4.3 BMC Firmware Upgrade
4.3.1 Load New BMC Firmware Image
Input the IPMItool HPM.1 upgrade command and select the new BMC firmware
image.
4.3.2 Activate BMC Firmware
After the new BMC firmware is successfully downloaded to the board (known as the
“deferred” version), it needs to be activated before it will be functional. Use following
HPM.1 command:
The front panel FRU LED’s 1 and 2 (green BMC and green payload LED) are flashing
during the FW update activation! This procedure needs around 60 seconds to finalize
the update.
[root@localhost ~]# ipmitool hpm upgrade
mic6313_standard_hpm_fw_01_01.img
PICMG HPM.1 Upgrade Agent 1.0.9:
Validating firmware image integrity...OK
Performing preparation stage...
Services may be affected during upgrade. Do you wish to con-
tinue? (y/n): y
OK
Performing upgrade stage:
-------------------------------------------------------------
------------------
|ID | Name | Ver-
sions | % |
| | | Active | Backup |
File | |
|----|-------------|-----------------|-----------------|-----
------------|----|
| 1|6313 BMC | 1.01 00000000 | 0.23 00000000 |
1.01 00000000 |100%|
| |Upload Time: 00:26 | Image Size: 333252
bytes |
-------------------------------------------------------------
------------------
(*) Component requires Payload Cold Reset
Firmware upgrade procedure successful
[root@localhost ~]# ipmitool hpm activate
PICMG HPM.1 Upgrade Agent 1.0.9:
Waiting firmware activation...OK