Advantech MIC-6314 Series, User Manual

Page: 25 / 136

13 MIC-6314 User Manual
Chapter 1
H
ardware
C
onfiguration
1.6 Connector Definitions
Table 1.13 lists the function of every connector. Figures 1.3 and 1.4 show the location
of every connector.
Figure 1.4 MIC-6314 front panel ports, indicators, and buttons
MIC-6314 supports three BMC-controlled front panel LEDs.
The LED behaviors are explained below.
1.6.1 USB Connectors
MIC-6314 provides both USB 3.0 and USB 2.0 channels. The front panel features
two USB 3.0 ports (USB 1 and USB 2) and one USB 2.0 port. Two USB 2.0 and USB
3.0 channels are routed to the P5 connector, and five USB 2.0 channels to the P6
connector. The USB interface provides complete plug-and-play functionality, as well
as hot attach/detach capability for up to 127 external devices. The MIC-6314 USB
interface complies with USB specifications, R 3.0, and is fuse protected (5V @ 1.1A).
The USB interface can be disabled in the system BIOS setup. The USB controller
default is set to “Enabled”.
Table 1.12: MIC-6314 Connector Description
Number Function
CNSATA1 SATA HDD daughter board
J15 XMC
CNDIMM SODIMM socket
Table 1.13: Front Panel LEDs
LED Color Description
1 Blue Hot-swap capability indicator
2 Green BMC indicator
3 Green
Flashing = FW application active, payload (x86) in sleep
Solid = FW application active, payload (x86) active
Item Meaning Color Behavior
Power Power on Green LED on
HDD HDD active Yellow Blinking
Hot swap Ready to perform hot swap Blue LED on
BMC act LED BMC active Green LED on