Advantech MIC-6314 Series, User Manual

Page: 91 / 136

79 MIC-6314 User Manual
Chapter 4
H
PM.1
Update
4.4 FPGA configuration upgrade
4.4.1 Load new FPGA image
Type IPMItool HPM.1 upgrade command and select the new FPGA image.
4.4.2 Activate FPGA configuration
Although the new FPGA configuration is successfully stored on the board (“deferred”
version), the firmware must be activated before loading onto the FPGA chip. Perform
the following two actions to activate the firmware and complete the upgrade:
4.4.2.1 HPM.1 Activate Command
Schedule FPGA loading using the HPM.1 activate command shown below.
[root@localhost ~]# ipmitool hpm upgrade
mic6313_fpga_standard_01_14.img
PICMG HPM.1 Upgrade Agent 1.0.9:
Validating firmware image integrity...OK
Performing preparation stage...
Services may be affected during upgrade. Do you wish to con-
tinue? (y/n): y
OK
Performing upgrade stage:
-------------------------------------------------------------
------------------
|ID | Name | Ver-
sions |
| | | Active | Backup |
File | |
|----|-------------|-----------------|-----------------|-----
------------|----|
|* 2|6313 FPGA | 1.14 00000000 | ---.-- -------- | 1.14
00000022 |100% |
| |Upload Time: 00:15 | Image Size: 104428
bytes |
-------------------------------------------------------------
------------------
(*) Component requires Payload Cold Reset
Firmware upgrade procedure successful
[root@localhost ~]# ipmitool hpm activate
PICMG HPM.1 Upgrade Agent 1.0.9: