Advantech MIC-6314 Series, User Manual

Page: 77 / 136

65 MIC-6314 User Manual
Chapter 3
B
MC Firmware
O
peration
3.5.7 Read Port 80 (BIOS POST Code) OEM Command
To read the actual BIOS boot state via IPMI, the BMC provides an Advantech OEM
command to reflect the actual BIOS POST (Port 80) code.
Response:
3.5.8 MAC Address Mirroring OEM Command
The LAN controller MAC addresses are stored in the FRU EEPROM to ensure the
MACs are available even when the payload is not powered on. This helps to relate
the MAC address and the physical/logical module location.
The MIC-6314 board is equipped with a total of five MAC addresses.
Read MAC address OEM command:
Response:
3.5.9 Load Default Configuration OEM Command
Several configurations settings are provided by the BMC. To reset all settings to their
default values, an OEM command is available to achieve this using only one IPMI
command.
Response:
ipmitool raw 0x2e 0x80 0x39 0x28 0x00
39 28 00 <POST Code>
Table 3.14: MAC Address Mapping
MAC Number LAN Interface
0 LAN1
1 LAN2
2 LAN3
3 LAN4
4 BMC NCSI MAC
ipmitool raw 0x2e 0xe2 0x39 0x28 0x00 <MAC Number>
39 28 00 <MAC-Address>
ipmitool raw 0x2e 0xF2 0x39 0x28 0x00
39 28 00