Advantech EKI-9226G Series, User Manual

Page: 115 / 169

102 EKI-9226G Series User Manual
4.9 Management
4.9.1 LLDP
LLDP is a one-way protocol without request/response sequences. Information is
advertised by stations implementing the transmit function, and is received and pro -
cessed by stations implementing the receive function.
4.9.1.1 LLDP System Settings
The LLDP System Settings allows you to configure the status (enabled or disabled)
for the protocol, set the interval for frame transmission, set the hold time multiplier
and the re-initialization delay.
To access this page, click
Management > LLDP > LLDP System Settings .
Figure 4.103 Management > LLDP > LLDP System Settings
The following table describes the items in the previous figure.
The ensuing table for LLDP Global Config settings are informational only: LLDP
Enabled, LLDP PDU Disable Action, Transmission Interval, Holdtime Multiplier,
Reinitialization Delay and Transmit Delay.
Item Description
Enabled Click Enabled or Disabled to set the Global Settings state.
LLDP PDU Disable
Action
Click to select the LLDP PDU handling action when LLDP is globally
disabled. Options include: Filtered, Bridged, or Flooded.
Transmission Interval Select the interval at which frames are transmitted. The default is 30
seconds, and the valid range is 5 to 32768 seconds.
Holdtime Multiplier Select the multiplier on the transmit interval to assign to TTL.
Reinitialization Delay Select the delay length before re-initialization.
Transmit Delay
Select the delay after an LLDP frame is sent.
Apply Click Apply to save the values and update the screen.