Advantech EKI-9226G Series, User Manual

Page: 120 / 169

EKI-9226G Series User Manual 107
The ensuing table for User Status settings are informational only: User Name,
Access Right, Auth-Protocol, Priv-Protocol and Delete (click to delete the desired
user name).
4.9.2.5 SNMP Trap
The SNMP Trap page allows you to set the IP address of the node and the SNMP
credentials corresponding to the version that is included in the trap message.
To access this page, click
Management > SNMP > SNMP Trap .
Figure 4.112 Management > SNMP > SNMP Trap
The following table describes the items in the previous figure.
The ensuing table for Trap Host Status settings are informational only: No., IP
Address, Community Name, Version and Delete (click to delete the desired IP
address).
Auth-Protocol Click the drop-down menu to select the authentication level: MD5 or
SHA. The field requires a user password.

MD5: specify HMAC-MD5-96 authentication level

SHA: specify HMAC-SHA authentication protocol
Password Enter the characters to define the password associated with the
authentication protocol.
Priv-Protocol Click the drop-down menu to select an authorization protocol: none or
DES.The field requires a user password.

None: no authorization protocol in use

DES: specify 56-bit encryption in use
Password Enter the characters to define the password associated with the
authorization protocol.
Add Click Add to save the values and update the screen.
Item Description
Item Description
IP Address Enter the IP address to designate the SNMP trap host.
Community Name/
User Name
Click the drop-down menu to select a defined community name.
Version Click the drop-down menu to designate the SNMP version credentials
(v1, v2c - trap, v2c - inform, v2c - trap or v2c - inform).
Add Click Add to save the values and update the screen.