Advantech EKI-8500 Series, User Manual

Page: 75 / 98

64 EKI-8500 Series User Manual
4.3.5.5 FRER
This function allows you to inspect the current FRER configurations
1. Navigate to Configuration > TSN and click FRER
The FRER Configuration Parameters page displays.
Figure 4.38 FRER Configuration Parameters
The following table describes the items in the FRER Configuration Parameters page.
Base Time Enter an string to indicate the administrative value of the BaseTime
parameter for the gate (value: a representation of a PTPtime value,
consisting of decimal number of seconds since epoch). The time can
be given with a resolution of nine decimals.
Admin IPV Click the drop-down menu to select the administrative value of the IPV
parameter for the gate. A value of -1 denotes the null value.
GCL Length Enter an string to indicate the number of entries in the Gate Control
List.
GCL Configuration Displays the configuration of the Gate Control List.
Enable Gate-closed-
due-to invalid-rx
Click to enable or disable (default) whether to close the gate if invalid
data is received.
Enable Gate-closed-
due-to octets-
exceeded
Click to enable or disable (default) whether to close the gate if too
many octets are received.
Config Change The ConfigChange parameter signals the start of a configuration
change for the gate when it is set to TRUE. This should only be done
when the various administrative parameters are all set to appropriate
values.
Add New Entry Click Add New Entry to add Stream Gate entry.
Save Click Save to save changes.
Reset Click Reset to undo any changes made locally and revert to
previously saved values.
Item Description
Item Description
Instance Displays the instance of the identifier.
Mode Displays the mode of operation: Generation or Recovery.
Enable Displays the FRER instance status.
Ingress Streams Enter a string to indicate the list of ingress stream IDs.
FRER VLAN Displays the VLAN ID that ingress flows get classified to.
Egress Ports Displays the port numbers that this FRER instance will hit.
Algorithm Displays the algorithm used by Recovery function. Vector or match.
History Length Displays the history length of vector algorithm.
Reset Timeout Displays the reset timeout of Recovery function.
Take-no-sequence If true, accept all frames whether they are R-tagged or not.
Individual Displays the individual recovery status.
Terminate Strip R-Tag from a frame before presenting it on egress.
Enable Enable/disable Latent error detection.
Error Diff Displays the latent error detection error difference.
Period Displays the latent error detection period.