Advantech EKI-8500 Series, User Manual

Page: 64 / 98

EKI-8500 Series User Manual 53
The DSCP Classification page displays.
Figure 4.25 DSCP Classification
The following table describes the items in the previous figure.
4.3.4.11 Ingress Map
This function shows a table of QoS Ingress Maps which is made up of individual map
entries. Each entry has a key and an action. The key indicates which fields of the
frame will be mapped to the fields specified by and according to the action. Each Map
can hold a number of map rules, or mappings between possible keys and actions.
Which of those rules will be applied depends on the selection of (Key-Type, Action-
Type). Each row describes a user-defined map.
Maps contain multiple rules. The page allows you to view and configure the key and
action filters that will be used when searching through the rules.
1. Navigate to Configuration > QoS and click Ingress Map .
The QoS Ingress Map Configuration page displays.
Figure 4.26 QoS Ingress Map Configuration
The following table describes the items in the previous figure.
Item Description
CoS Displays the identifier for the class of service entry.
DSCP DP0 Click the drop-down menu to select the classified DSCP value
(values: 0 to 63) for Drop Precedence Level 0.
DSCP DP1 Click the drop-down menu to select the classified DSCP value
(values: 0 to 63) for Drop Precedence Level 1.
DSCP DP2 Click the drop-down menu to select the classified DSCP value
(values: 0 to 63) for Drop Precedence Level 2.
DSCP DP3 Click the drop-down menu to select the classified DSCP value
(values: 0 to 63) for Drop Precedence Level 3.
Save Click Save to save changes.
Reset Click Reset to undo any changes made locally and revert to
previously saved values.
Item Description
Map ID Displays the map ID for the entry. Click the ID to edit the Ingress map.