EKI-1528-DR Series User Manual
44
4.
Locate
Manual Mapping
and select it.
Figure 5.5 Selecting Manual Mapping
The
Manual Mapping Virtual COM Port
window displays.
5.
In the
Device
>
Serial Port
drop-down menu, select the target port to map.
This is the physical serial port on the EKI device.
6.
In the
Host
>
COM Port
drop-down menu, select the target COM port to map.
This is the virtual port on the target PC.
Figure 5.6 Selecting Manual Mapping
7.
Click
Map it
to continue the process. The mapping process may require a short
time. Once this step is completed, the
Manual Mapping Virtual COM Port
win-
dow displays again to map the VCOM port on the target PC.
VCOM
PC Port
EKI
Physical
Summary of Contents for EKI-1528CI
