Advantech EKI-1528CI, User Manual, Page: 40 / 89

EKI-1528-DR Series User Manual 30
3.4.4 Restore to Factory Default Settings
The configuration utility provides this function to restore the serial device server to
factory default settings. The confirm message will display when you click
Restore to
Factory Default Settings . If you really want to restore the serial device sever to fac-
tory default settings, click “Yes” to continue.
The serial device server will power off within ten seconds. After power is restored, all
settings will be reset to the factory defaults. If the power remains on for more than ten
seconds, the serial device server will not be changed.
3.4.5 Resetting the Device
The Reset Device allows you to reset the serial device server. The function discon-
nects both the ethernet and serial connections.
The function also allows the serial device server to save new configuration settings to
flash memory. Once a new setting is changed, you can use the Save function to
accept the changes. Then, you will need to initiate a reset function to save the set-
tings to flash memory.
From the To access this page, click Tools > Reboot .
Click Reboot to reboot the serial device server. Any configuration changes you have
made since the last time you saved will be lost.
To reset the device:
1. Right-click a desired device to display the settings menu.
2. Select Reset Device .
Figure 3.16 Change Password
The device initiates a reset function. Once the process is complete, the serial device
server displays under the Serial Device Server listing once again.