Advantech EKI-1528CI, User Manual, Page: 63 / 89

53 EKI-1528-DR Series User Manual
6.2.2 Accessing the Web Page via Web Browser
Once the device is installed and connected, power on the device. The following infor-
mation guides you through the logging in process.
1. Launch your web browser on the PC.
2. In the browser’s address bar, type the device’s default IP address (10.0.0.1
(Eth1) and 10.0.0.2 (Eth2)).
The main interface displays.
6.3 System
You can change the Device Name and Device Description on this page. You can also
enable or disable the Telnet and SNMP functions. Moreover, you can set the Time-
zone related settings.
To access this page, click System .
Figure 6.2 System
The following table describes the items in the previous figure.
Item Description
Firmware version Displays the current firmware version of the device.
Revision number Displays the revision number of the device.
Device Name Enter the device name: up to 31 alphanumeric characters.
Device Description Enter the device description.
Telnet Click Enabled or Disabled to set remote access through the Telnet
Service function.
SNMP Click Enabled or Disabled to define the SNMP daemon.
Local Time Click Modify to set local date and time of the system.
Time Server Enter the address of the SNTP server. This is a text string of up to 64
characters containing the encoded unicast IP address or hostname of
a SNTP server. Unicast SNTP requests will be sent to this address. If
this address is a DNS hostname, then that hostname should be
resolved into an IP address each time a SNTP request is sent to it.
Save Click Save to save the values and update the screen.