Advantech EKI-1528CI, User Manual, Page: 65 / 89

55 EKI-1528-DR Series User Manual
6.5 Port Configuration
There are Basic, Operation Mode, and Advanced Setting in the serial port configura-
tion. For more detailed information for setting.
6.5.1 Basic
The Basic menu allows for the configuration of the serial interface type, baud rate,
parity, data / stop bits, and flow control for port configuration.
To access this page, click Port Configuration > Basic .
Figure 6.4 Port Configuration > Basic
The following table describes the items in the previous figure.
6.5.2 Operation
The Operation menu allows for the configuration of the mode type and related attri-
butes for port configuration.
Note! All new configurations will take effect after rebooting. To reboot the
device, click
Tools > Reboot .
Item Description
Type Click the drop-down menu to select a serial interface: RS-232, RS-422
or RS-485.
Baud Rate Enter a value to specify the baud rate. The value should conform to the
current transmission speeds of connected devices when setting the
baud rate.
Parity Click the drop-down menu to select the parity: None, Odd, Even, Mark
or Space.
Data Bits Click the drop-down menu to select the data bits: 5, 6, 7, or 8.
Stop Bits Click the drop-down menu to select the stop bits: 1, 1.5 or 2.
Flow Control Click the drop-down menu to select the flow control mode: None, XOn/
XOff, RTS/CTS or DTR/DSR
Save Click Save to save the values and update the screen.