Advantech EKI-1528CI, User Manual

Page: 34 / 89

EKI-1528-DR Series User Manual 24
Click on each item to enter the configuration page to change the setting. The configu-
ration will be introduced on following sections.
Figure 3.8 Viewing Basic Settings
3.3.3 Network Settings
Prior to setting up the server’s IP address determine the IP address mode.
There are four mode types available:

Static IP: mode to assign a specific assigned address

DHCP / AutoIP: mode to automatically assign IP addresses through a DHCP
server

BOOTP / AutoIP: mode to automatically assign an IP address through the con-
figuration server

DHCP/BOOTP/AutoIP: mode to automatically assign an IP address using a
Bootstrap Protocol or DHCP server.
The server is set with the following default IP configuration:
10.0.0.1 (Eth1)
10.0.0.2 (Eth2)
The EKI series includes a software utility option, which you can install on your sys-
tem, for configuration through computer-based software. The EKI series also
includes a web interface option for configuration through a standard web browser.