Advantech EKI-1528CI, User Manual, Page: 64 / 89

EKI-1528-DR Series User Manual 54
6.4 Ethernet Configuration
Choose either Eth 1 or Eth 2 in the Ethernet Configuration page.Enter the corre-
sponding values for your network environment. Remember press Save after fill in all
values.
To access this page, click Ethernet Configuration .
Figure 6.3 Ethernet Configuration
The following table describes the items in the previous figure.
Item Description
IPv4 Configuration
Mode Click the drop-down menu to select the IP Address Setting mode:
Static IP, DHCP, or BOOTP.
MAC Address Enter the MAC address to which packets are statically forwarded.
IP Address Enter a value to specify the IP address of the interface. The default is
10.0.0.1 (Eth1) & (0.0.0.2 (Eth2).
Subnet Mask Enter a value to specify the IP subnet mask for the interface. The
default is 255.0.0.0.
Default Gateway Enter a value to specify the default gateway for the interface.
DNS Configuration
DNS Click the radio button to select the DNS mode: Automatic or Specific.
Current Status
IP 1 Displays the current IP address 1 of the device.
IP 2 Displays the current IP address 2 of the device.
Save Click Save to save the values and update the screen.