Advantech ADAM-6000 series User Manual Download Page 94

Page: 94 / 156

ADAMTCP_SendReceive6KTCPCmd

Description:

This function is specific for 6000 series. It accepts the command in ASCII format string. Then transform

it to follow the Modbus/TCP communication protocol.

Syntax:

int ADAMTCP_SendReceive6KTCPCmd(char szIP[], char szSendToTCP[], char szReceiveFromTCP[]

char szModbusSend[], char szModbusReceive[])

Parameter:

szIP[in]: the IP Address of the target ADAM-6000 module to be connected.

szSendToTCP[in]: the ASCII format string that send to the ADAM-6000.

szReceiveFromTCP[out]: the ASCII format string that response from the ADAM-6000.

szModbusSend[out]: the Modbus/TCP format string that send to the ADAM-6000.

szModbusReceive[out]: the Modbus/TCP format string that response from the ADAM-6000.

Return:

Please refer to Chapter 6-2-3 "Return Codes" for more detail information

Summary of Contents for ADAM-6000 series





























































































































































Search results

Summary of Contents for ADAM-6000 series

Reviews:

Brands by name

Popular brands

Advantech ADAM-6000 series, User Manual

Search results

Summary of Contents for ADAM-6000 series

Reviews:

Brands by name

Popular brands