Step 3.
Mapping the I/O data base into ADAM-6000 I/O modules.
1) In column A, note the ADAM-6000/TCP IP addresses mapped for individual function areas.
2) In column B, list the I/O module’s product number.
3) In column C, enter the maximum number of I/O points available per module.
4) In column D, total the number of the I/O point you need.
5) In column E, calculate the total number of these modules that you will need.
6) In column F, enter the number of spare modules that you may need for future expansion in your systems.
7) In column G, enter the total number (Re Spare) of these modules that you need for these systems.
<A> <B> <C> <D> <E> <F> <G>
ADAM-6000
IP Address
I/O Module
Product No.
I/O Points
per Module
Total I/O Points
Required
I/O Module
Required
Spare
I/O Modules
Total
I/O Modules
Table A-2
Summary Required Modules
Summary of Contents for ADAM-6000 series
