Advantech ADAM-6000 series, User Manual

Page: 138 / 156

Name Set Digital Output
Description Set the digital output status in ADAM-6000 analog input module.
Syntax $aaDnd(cr)
$ is a delimiter character.
aa (range 00-FF) represents the 2-character hexadecimal Modbus address
of the ADAM-6000 module to be read. (Always 01)
D represents the digital output setting command.
n (range 0-1) represents the specific channel you want to set the output
status.
d (range 0-1) represents the status you want to set to the specific channel
(cr) is the terminating character, carriage return (0Dh)
Response !aa(cr) if the command is valid.
?aa(cr) if an invalid operation was entered.
There is no response if the module detects a syntax error or communication
error or if the specified address does not exist.
! delimiter character indicating a valid command was received.
? delimiter character indicating the command was invalid.
aa (range 00-FF) represents the 2-character hexadecimal Modbus address of
an ADAM-6000 module.
(cr) is the terminating character, carriage return (0Dh)
Example command: $01D01(cr)
response: !01
The command set “ON” status to the channel 0 in the analog input module at
address 01h.
6-4-5 Analog Input Alarm Command Set