manualshive.com logo in svg

Advantech ADAM-6000 series, User Manual

Share
Download
Advantech ADAM-6000 series User Manual Download Page 19

3-1 Determining the proper environment 

Before you start to install the ADAM-6000 modules, there are something needed to check. 

 

3-1-1 Check the content of shipping box 

Unpack the shipping boxes and make sure that the contents include: 

 

ADAM-6000 module with one bracket and DIN Rail adapter 

 

ADAM-6000 module User’s Notes 

 

3-1-2 System Requirements 

 

Host computer 

- 

IBM PC compatible computer with 486 CPU (Pentium is recommended) 

- 

Microsoft 95/98/2000/NT 4.0 (SP3 or SP4)/XP or higher versions 

- 

At least 32 MB RAM 

- 

20 MB of hard disk space available 

- 

VGA color monitor 

- 

2x or higher speed CD-ROM 

- 

Mouse or other pointing devices 

- 

10 or 100 Mbps Ethernet Card 

 

10 or 100 Mbps Ethernet Hub (at least 2 ports) 

 

Two Ethernet Cable with RJ-45 connector 

 

Power supply for ADAM-6000 (+10 to +30 V unregulated) 

Summary of Contents for ADAM-6000 series





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands