manualshive.com logo in svg

Advantech ADAM-5510/P31, Manual

Share
Download
Advantech ADAM-5510/P31 Manual Download Page 18

0-2

ADAM-5510/P31

Quick Start

Welcome & Preview

Welcome to the Advantech ADAM-5510/P31 user's guide. This
chapter was written to provide users with a fast and easy installation
guide and with the basic operating skills necessary to use the ADAM-
5510/P31's core capabilities.

This Quick Start chapter contains the following sections:

•

System requirements

•

Installation guide

•

Utility application program

•

A training example

0.1 System Requirements

0.1.1 Host computer

1. IBM PC compatible computer with 486 CPU(Pentium is recommend-

ed).

2. Microsoft NT 4.0 (SP3 or SP4) or higher versions.

3. Advantech Paradym-31 v4.1.

4. At least 32 MB RAM.

5. 20 MB of hard disk space available.

6. VGA color monitor.

7. 2x or higher speed CD-ROM.

8. Mouse or other pointing devices.

9. At least one standard RS-232 port (e.g. COM1, COM2).

10. One RS-232 DB-9 straight through cable for downloading/program-

ming.

11. One RS-485 card or RS-232 to RS-485 converter (e. g. ADAM-4520)

for configuring ADAM-4000 modules.

Summary of Contents for ADAM-5510/P31











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands