Advantech-DLoG DLT-V83 Series Operating Instructions Manual Download Page 150

Page: 150 / 157

Guidelines and certificates

150 / 157

DLT-V83 Operating Instructions V2.00

equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:



Reorient or relocate the receiving antenna.



Increase the separation between the equipment and receiver.



Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.



Consult the dealer or an experienced radio/TV technician for help.

CAUTION

Radio frequency exposure.

In order to comply with the FCC requirements regarding radio frequency exposure from

vehicle-mounted transmission devices:



The antenna has to be kept at least 20 cm away from people.

Any change or modification which is not expressly approved in the corresponding pages can

lead to the withdrawal of the operating license for this device.

FCC ID

Please find the FCC ID on the device lables.

20.3.4.

ICES Canada

English:

This Class A digital apparatus complies with Canadian ICES-003.

Français

[French]:

Cet appareil numérique de la classe A est conforme à la norme NMB-003

du Canada.

IC ID

Please find the IC ID on the device lables.

20.4.

RoHS Directive EU

We hereby confirm the conformity of our products compliant with the RoHS Directive 2011/65/EU of the

European Parliament and Council of June 8, 2011 on the restriction of the use of hazardous substances

in electrical and electronic equipment.

Summary of Contents for DLT-V83 Series






























































































































































Search results

Summary of Contents for DLT-V83 Series

Reviews:

Related manuals for DLT-V83 Series

Brands by name

Popular brands

Advantech-DLoG DLT-V83 Series, Operating Instructions Manual

Search results

Summary of Contents for DLT-V83 Series

Reviews:

Related manuals for DLT-V83 Series

Brands by name

Popular brands