Advantech-DLoG DLT-V83 Series Operating Instructions Manual Download Page 118

Page: 118 / 157

Mechanical mounting

118 / 157

DLT-V83 Operating Instructions V2.00

13.

Mechanical mounting

13.1.

Warning about injuries and Property damage

WARNING

Risk of personal injury and Property damage due to improper installation and

commissioning.

Only authorized skilled personnel are permitted to install and commission the DLT-V83.

Moreover, specialized knowledge about battery packs and the applicable safety regulations is

also required for DLT-V83 Industrial Computers with integrated UPS (optional).

If the DLT-V83 is incorrectly installed and placed into operation, any warranty for this device

will be rendered void.

Risk of injury due to the weight of the device

The DLT-V83 can fall down and cause injuries due to its weight.



Always hold the device by the housing with both hands.



Never use the antenna cap as a handle. It can break due to the weight involved.



Use the assistance of a second person for installation work.



The installation height of the device shall not exceed 2 m.

Risk of injury due to sharp-edged parts on the device

The strain relief rail of the DLT-V83 can have sharp edges and cause cutting injuries.



Do not hold the device by the strain relief rail.

Risk of injury and damage due to improper deployment location.



Observe the intended use of the DLT-V83, e.g. not in potentially explosive areas, not in

life-supporting facilities.



Observe that the deployment location of the DLT-V83 must comply with the permissible

environmental conditions.



The installation height of the device shall not exceed 2 m.

Danger if mounting bracket breaks



When installing the DLT-V83, make sure that no one will be injured if the bracket breaks

(e.g. because of a stress fracture).



Alternatively please put appropriate safety measures in place (e.g. install a security cable

in addition to the mounting bracket).

Radio wave emission in the vicinity of persons.

To ensure that the limits set for exposure to radio waves are not exceeded:



Install the DLT-V83 so that persons maintain a minimum distance of 20 to 50 cm to the

antenna.

Summary of Contents for DLT-V83 Series






























































































































































Search results

Summary of Contents for DLT-V83 Series

Reviews:

Related manuals for DLT-V83 Series

Brands by name

Popular brands

Advantech-DLoG DLT-V83 Series, Operating Instructions Manual

Search results

Summary of Contents for DLT-V83 Series

Reviews:

Related manuals for DLT-V83 Series

Brands by name

Popular brands