Advantech-DLoG DLT-V83 Series Operating Instructions Manual Download Page 9

Page: 9 / 157

Functional description

DLT-V83 Operating Instructions V2.00

9 / 157

3.2.

Mount, operate and service the device correctly

DLT-V83 Industrial Computers were designed and built according to modern technology and accepted

safety regulations.

However, the operation of the DLT-V83 can endanger personnel or third parties and cause damage to

the device and other material assets when, for example, the device is:

−

installed incorrectly or configured improperly.

−

operated by untrained or uninstructed personnel.

−

improperly operated and maintained.

−

not used as intended.

The owner/operator commitments with regards to safety (accident prevention regulations, occupational

safety) are to be followed.

3.3.

Device identification / name plate

The name plate on the rear side of the DLT-V83 must be legible at all times.



Do not damage the name plate or remove it from the device.

Information on the labels on the device (examples):

−

Model name, e.g. DLT-V8310, DLT-V8312, DLT-V8315

−

Serial number

−

FCC ID (Radio)

−

Barcode for internal use only

Summary of Contents for DLT-V83 Series






























































































































































Search results

Summary of Contents for DLT-V83 Series

Reviews:

Related manuals for DLT-V83 Series

Brands by name

Popular brands

Advantech-DLoG DLT-V83 Series, Operating Instructions Manual

Search results

Summary of Contents for DLT-V83 Series

Reviews:

Related manuals for DLT-V83 Series

Brands by name

Popular brands