54
3.3.18 Display
Depending on the physical mounted height of the panel, the contrast of the LCD may need adjusting to obtain
optimum viewing. The display option permits the contrast adjustment of the LCD.
[DISPLAY OPTIONS]
ADJUST CONTRAST
Press the
✔
button. The following display is shown:
Use the
buttons to adjust the contrast viewing angle for darker or lighter as required (the setting is
confirmed by the bar graph) and the press the
✔
button to confirm the change. Press ESC to cancel. The
display will automatically cancel if no button is pressed for 30 seconds (hour glass).
3.3.19 Panel
The Panel Menu Option shows a list of the internal panel circuits and provides a means to change their default
configuration settings.
Only use this
menu if changes are to be made to the default settings for the panel’s internal circuits. Use the
VIEW-PANEL Menu Option to view the state and operating condition of each circuit.
The display shows for example:
More>
Address State Type Value
>001.0 Normal VOLTAGE 5.6V
001.1 Normal VOLTAGE 5.6V
002.0 Normal CURRENT 0mA
002.1 Normal CURRENT 0mA
Use the
buttons to scroll through the circuits. Use the
buttons to view additional information. The zone
and Output Group Assignments can be modified if required.
For further information on the View
– Panel Options and the information that is presented, refer to the User
Manual.
