8
Install the panel, detection loops, sounder circuits, etc. in accordance with the instructions in Section
and then program the operation in accordance with the instructions detailed in Section
1.4
EN54 Functions
This Fire Alarm Control Panel is compliant with the requirements of EN54-2 (1997)
and EN54-4 (1997) and EN54-13 (2005).
In addition to the basic requirements, the following optional functions are provided
and these comply with the requirements of EN54.
C.I.E Optional Functions
EN54-2 Clause
Indication
Outputs
Controls
Outputs to Fire Alarm Devices
Outputs to Fire Routing Equipment
Output to Fire Protection Equipment
Investigation Delays to Outputs
Co-incidence Detection
Alarm Counter
Fault Signals from Points
Output to Fault Routing Equipment
Disablement of Points
Test Condition
Standardised I/O
7.8
7.9
7.10
7.11
7.12
Type B & Type C
7.13
8.3
8.9
9.5
10
11
P.S.E Functions
EN54-4 Clause
Operation from a main power supply
Operation from a standby battery
Monitor and Charge the Standby Battery
Recognise and Notify Supply Faults
5.1
5.2
5.3
5.4
System Functions
EN54-13 Clause
Transmission Path Integrity
Networks (non hierarchical)
4.5
4.3
This Fire Alarm Control Panel also supports additional functions that are not covered
by EN54. These are as follows:
Additional Function
Refer to
Paragraphs
Auxiliary Power Supply Output
Auxiliary Relay Outputs
Programmable Cause / Effect on Outputs (Phased Evacuation)
Printer Option
User Manual
