Hybrid Standalone NVR User Guide
3.8.5.12
Alarm Center
This feature is not supported by ADT at this time.
3.8.5.13
SNMP
SNMP is an abbreviation of Simple Network Management Protocol. It provides the basic network
management framework of the network management system. SNMP is widely used in many
environments, network devices, software and systems.
Figure 3-58
Enable the SNMP function. Use the corresponding software tool (MIB Builder and MG-SOFT MIB
Browser. You will need two MIB files: BASE-SNMP-MIB, NVR-SNMP-MIB) to connect to the device.
You can get the device’s corresponding configuration information after a successful connection.
To configure SNMP:
1.
In Figure 3-58 above, check the box to enable the SNMP function. Input the IP address of the PC
than is running the software in the Trap address. You can use the default setup for the rest of the
items.
2.
Compile the above mentioned two MIB file via the software MIB Builder.
3.
Run MG-SOFT MIB Browser to load the file from the previous step to the software.
4.
Input the device IP you want to manage in the MG-SOFT MIB Browser. Set the corresponding
version for future reference.
5.
Open the tree list on the MG-SOFT MIB Browser to get the device configuration. Here you can see
how many video channels, audio channels and application versions the device has.
Note:
A port conflict occurs when the SNMP port and Trap port are the same.
ADT does not support Audio functions at this time.
NVR32xx-P Series User Guide
78
