Hybrid Standalone NVR User Guide
3.7.7
Network Information
In this screen, you can see the Network Test and Network Load information. Click the
Network
icon
on the
Info
screen (see Figure 3-13 on page 40) to open the dialog.
Also refer to section
Figure 3-24
3.7.7.1
Network Load
Click the
Net Load
tab to view the follow statistics of the device network adapter.
Here you can view information of all connected network adapters. The connection status is shown as
offline if the connection is disconnected. Click a network adapter to view the flow statistics, such as
send rate and receive rate in the top panel.
3.7.7.2
Network Test
The Network Test tab is displayed in Figure 3-25.
Destination IP
Input a valid IPV4 address and domain name.
Test
Click to test the connection with the destination IP address. The test results display the average delay
and packet loss rate. You can view the network status as OK, bad, no connection, etc.
NVR32xx-P Series User Guide
48
